Contite Control
Contite Control is a slurry-applied waterproofing and bonding material for concrete walls, slabs, and construction joints.
- Brush or spray application
- Suitable for concrete, brick, and block
- Helps reduce water infiltration over large areas
More technical information is available below. Expand each section to view full details.
Uses and Benefits
- For use on concrete, brick, concrete block, and cinder block.
- Can be brush- or spray-applied in slurry form for broad coverage.
- Provides waterproofing support across large wall and slab areas.
- Can be applied between concrete placements to support bond continuity at joints.
Physical Properties
- Form: Powder
- Color: Grey
- Odor: Odorless
- pH Value: 11 to 13.5
- Boiling Range: N/A
- Vapor Density: Water vapor only
Typical Application Notes
Route the wall/slab junction and construction joints to sound concrete. Fill routed areas with Penetrating Mortar, then apply Contite Control by spray or brush at the specified coverage rate on vertical and horizontal surfaces.
Typical Application
